Home > News and Exhibitions > Content
Introduction Of Plastic Composite Geotextile Membrane
Jun 20, 2017

The appearance of the bi-directional stretch plastic composite Geotextile Membrane is like a square grid-like structure. Therefore, polypropylene and high-density polyethylene are the primary raw materials. After hot melt extrusion, punching, heating, vertical and horizontal positioning Stretched out. Higher resistance to the machine to destroy talent and enduring talent, as well as gravel friction coefficient poor;

Can increase the bearing capacity of the foundation (usually can raise more than 40%), additional dispersion angle (uniform from 38 degrees to 50 degrees); high tensile strength, high tensile modulus, creep resistance, Composite Geotextile Membrane chemical properties of stability. Composite Geotextile Membrane products base cloth varieties: acupuncture short fiber geotextile cloth, woven geotextile cloth, non-woven geotextile cloth, fiberglass mesh and so on.

(HDPE), low pressure polyethylene (LDPE), chlorinated polyethylene (CPE), EVA (ethylene copolymer), PVC and so on. 

There are extra insulation, moisturizing, anti-frost, antifreeze. Width of up to six meters, and narrow range of similar products compared to the reduction of the joints, reducing the cost of the project, reducing the duration, but also reduced due to improper handling and become hidden.

Resistant to water, corrosion resistance, high strength, wear resistance, low temperature resistance, non-toxic, flat drainage function, anti-seepage useful anti-aging function. Such as to take the laying of the use of longer life with a composite Geotextile Membrane and the ancient cloth, the membrane were used to improve the use of the results, the more frugal engineering hours, decreased engineering fees, comprehensive benefits clearly.