Home > Industry Knowledge > Content
Tons of bag handling in loading and unloading operations
Mar 22, 2018

Tons of bags and container bags are made of polypropylene as the main raw material. After adding a small amount of stable ingredients, the plastic film is melt extruded through an extruder, cut into filaments, and then stretched to form high through heat setting. Low-strength PP raw yarns with a low elongation, and then weaving and laminating a base fabric made of a plastic woven fabric, are made into tons of bags after sewing with suspenders and other accessories. The main unit is a crane or a forklift that can be transported in containers. It is convenient for shipping bulk bulk powder materials. It has the characteristics of large volume, light weight, and easy loading and unloading. It is one of the common packaging materials.

Tons of bag handling in loading and unloading operations

1. Do not stand under the bulk bag during lifting operations.

2. Please hang the hook in the center of the sling or sling, do not slant it, single-side or diagonally pull it.

3, Do not rub against other items during operation, hook up or collet the bag.

4. Do not pull the sling back to the outside.

5. When using a forklift truck for container bags, do not touch or tie the fork to the bag body to prevent smashing of the container bag.

6. When using the pallets in the workshop, try to use pallets to avoid hooking the container bags and moving them side by side.

7. Always keep the container bag upright when loading, unloading, and stacking.

8, do not stand container bags upright.

9. Do not tow the container bag on the ground or concrete.

10. When it is necessary to store outside, the container bag should be placed on the shelf, and the container bag must be covered tightly with the opaque shed cloth.

11. After use, wrap the container bag with paper or opaque shed cloth, and store it in the ventilation